Catalyst 2960 48 10/100 PoE + 2 1000BT +2 SFP LAN Base Image

WS-C2960-48PST-L Catalyst 2960 48 10/100 PoE + 2 1000BT +2 SFP LAN Base Image
€ 9571.59 (33021.99 Lt)
PREKĖS KODAS: WS-C2960-48PST-L
PREKIŲ LIKUTIS: 0 teirautis
PRISTATYMO TERMINAS: 1-5 D.D.Jei prekės atsiimamos ne Vilniaus ar Kauno salonuose, pristatymas gali trukti iki 10 D.D
GARANTINIS TERMINAS: 60 mėn.
Būk pirmas, įvertink!
Specifikacijos
Data Transfer Rate
  • 16 Gbps switching fabric
  • 13.3 Mpps Forwarding rate based on 64-byte packets
  • Depth 445 mm
    Duplex Autonegotiating on all ports automatically selects half- or full-duplex transmission mode to optimize bandwidth
    Features & Benefits
  • Supports 15.4W up to 24 ports, allowing transparent connectivity to PoE devices, including Cisco IP phones, Cisco Aironet wireless LAN access points, as well as any IEEE 802.3af-compliant end device
  • Cisco EnergyWise to measure, report and reduce energy usage across the entire organization
  • Height 332 mm
    Interface
  • 48 Ethernet 10/100 PoE ports and 2 10/100/1000 uplinks and 2 SFP uplinks
  • 1 RU fixed-configuration
  • LAN Base Image installed
  • LED
  • Per-port status: Link integrity, disabled, activity, speed, full-duplex
  • System status: System, RPS, link status, link duplex, link speed
  • MAC Address Table 8 K
    MANAGEMENT YES
    Manufacturer CISCO
    Manufacturer Datasheet http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/product_data_sheet0900aecd80322c0c.html
    Marketing Text 3 Year with Next Business Day Advance Hardware Replacement
    MODULE/TRANSCEIVER SLOTS 2 * 10/100/1000TX and 2 Small Form-Factor Pluggable (SFP) uplinks
    Network Cables
  • 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
  • 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
  • 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
  • 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
  • 1000BASE-SX, -LX/LH, -ZX, -BX and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)
  • 100BASE-LX, -BX, -FX: LC fiber connectors
  • NUMBER OF PORTS (10/100 BASE-T) 48
    PoE YES
    Power The internal power supply supports input voltages between 100 and 240VAC
    PRODUCT DESCRIPTION The Cisco Catalyst 2960 48 Power over Ethernet (PoE) switch is a new member of the Cisco Catalyst 2960 Series of fixed-configuration standalone switches with PoE for entry-level enterprise, midmarket, and small branch office networks. The Cisco Catalyst 2960 Series with PoE allows connectivity to Ethernet-powered devices, including Cisco IP phones, wireless access points, and video cameras.
    PRODUCT TYPE SWITCH
    Security http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/product_data_sheet0900aecd80322c0c.html
    Standard http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/product_data_sheet0900aecd80322c0c.html
    Type Cisco Catalyst 2960 48 Power over Ethernet (PoE) Switch
    Warranty 3 years
    Weight 5.400 Kg
    Width 44 mm
    Aprašymas

    The Cisco Catalyst 2960-48PST-L can support 48 PoE ports with total PoE power output capacity at 370W. Taking advantage of Cisco Catalyst Intelligent Power Management, the Cisco Catalyst 2960-48PST-L configuration can deliver the necessary power to support 24 ports at 15.4W, 48 ports at 7.7W, or any combination in between. Cisco Catalyst 2960 Series with PoE models support Cisco prestandard PoE and are IEEE 802.3af-compliant. PoE eliminates the need for wall power to each PoE-enabled device and eliminates the cost for additional electrical cable and circuits that would otherwise be necessary in IP phone and WLAN deployments. PoE switches also eliminate the need for power injectors and PoE midspans for powering IP devices. Table 1 provides a brief description of the new switch.

    Komentarai
    Reikia pagalbos?
    8 601 10100
    Atsiėmimas Lietuvoje
    Lizingo skaičiuoklės